Test Systems

ATS-KMFT 670M-6 is a combined In-Circuit and Functional test system

• 1 combined measuring unit

for In-Circuit measurement

• pin contact (contact fault)
• short circuit, isolation (solder defect, interrupt)
• IC and transistor rotation
• components
  

for Functional test

• measuring DC and AC voltage
• peak voltage up to 100 kHz
• time- and frequency measuring unit
  periods, pulse widths, rise and fall times, events, pulse ratio and delay, phase measurement, distortion factor, Fourier analysis
• transient recorder and much else
  

• 6 Fixed voltages +5 V, -5 V, +15 V, -15 V, +40 V, -40 V
  
  
• 2 Programmable twin PSUs with 4 output voltages
  • 0 to +38 V, resolution 10 mV, 1 A
  • 0 to -38 V, resolution 10 mV, 1 A
    
    
• 2 2/4Quadrant Precision PSUs, 16 Bit
  • 0 to +38 V, resolution 1 mV, max. 500 mA, resolution 10 µA
    
  • 0 to -38 V resp., resolution 1 mV, 30–500 mA, resolution 10 µA
    
    
• Programmable Generators
  
  • programmable sine- and squarewave generator
    frequency 0 Hz to 150 kHz, resolution 74.5 mHz
    max. amplitude sine 12.75 V_eff, resolution 5 mV
    max. amplitude squarewave 25.5 V_pp, resolution 5 mV
    current 1 A
  • pulse generator PWM
    0.6 Hz to 10 MHz
    pulse width 0.8 s to 50 ns
    amplitude programmable from 1.8 V to 5 V
    
    
• 1 Electronic load
  • current 5.1 A
  • max. voltage 60 V
  • max. 75 W
    
    
• 1 Stimulus matrix
  • 48 channels
  • 12 bus systems
    
    
• 1 Measuring matrix
  • 96 in-circuit-functional measuring channels and guard channels
  • max. 1,440 / 4,320 channels
    
    
• 1 Current and sources monitor
  
  
• Inline control
  
  
• Fixture control
  
  
• Various interfaces
  
  • USB 5 V, 500 mA, 480 MHz
  • SPI 2.5 kHz to 10 MHz, 1.8 V to 5 V
  • 2x I2C-Bus 56 kHz to 1 MHz
  • 2x RS232-interface ±5 V, 300 Hz to 1.25 MHz
  • 422/485-interface 5 V, 300 Hz to 1.25 MHz
  • Robotbyte 16 bi-directional, 1.8 V to 5 V, ca. 5 kHz