In-Circuit- and Functional Test System ATS-UKMFT 727/RML
ATS-UKMFT 727 is a combined In-Circuit- and Functional test system for testing electronic assemblies.
SOFTWARE CONFIGURATION:
- Transparent ATS-OS menu-driven software
- Operating system: WINDOWS 10/11®
- Test program wizard
- APG automatic program generators
- Autolearn
- Autodischarge
- Multiple printed panel test
- Automatic test program optimisation
- Flashing tools
- Fieldbus communication
- Inline or stand-alone
HARDWARE CONFIGURATION:
- 1 combined measuring unit
for In-Circuit measurement
- pin contact (contact fault)
- short circuit, isolation (solder defect, interrupt)
- IC and transistor rotation
- components
for Functional test
- measuring DC and AC voltage
- peak voltage up to 100 kHz
- time- and frequency measuring unit
periods, pulse widths, rise and fall times, events, pulse ratio and delay, phase measurement, distortion factor, Fourier analysis - transient recorder and much else
- 5 Fixed voltages, +5 V, - 5 V, +15 V, -15 V, 28 V
- 4 programmable PSUs
- PSU1+ 0 to +24 V, resolution 1 mV, 50 mA to 1 A, resolution 10 µA
- PSU1- 0 to -24 V, resolution 1 mV, 30 mA up to 0.5 A, resolution 10 µA
- PSU2+ 0 to +24 V, resolution 1 mV, 50 mA to 1 A, resolution 10 µA
- PSU2- 0 to -24 V, resolution 1 mV 30 mA up to 0.5 A, resolution 10 µA
- Programmable Generators
- sine and squarewave generator
frequency 0 Hz to 1 MHz, resolution 10 mHz
amplitude sine 7 Veff, resolution 5 mVeff
amplitude squarewave 0 to 10 Vpk, resolution 10 mVpk
offset -10 V to +10 V, resolution 10 mV
pulse ratio 0–100 %, resolution 0.001 %
current max. 1.1 A
- PWM programmable pulse generator
- sine and squarewave generator
- 1 Combined Measuring-Logic-Stimulus Matrix
- 32 Stimulus channels
- 32 In-circuit-functional measuring channels and Guard channels
max. 608 channels - 32 Logic channels, 3.3 V or 5 V
- Internal monitoring
- Fixturing control, e.g. contacting on two stages
- Various interfaces
- USB 5 V, 500 mA, 480 MHz
- SPI 2.5 kHz to 10 MHz, 1.8 V to 5 V
- 2x I2C-Bus 56 kHz to 1 MHz
- 2x RS232-interface ±5 V, 300 Hz to 1.25 MHz
- 422/485-interface 5 V, 300 Hz to 1.25 MHz
- 8 bit Write/Read Byte, 1.8 V to 5 V, about 5 kHz
- Optional Hardware for ATS-UKMFT 727 such as
- Control computer
- solder defect test
- inverse polarity of elcaps and tantal capacitors
- diagnose and calibration unit
- Optional Software Modules for ATS-UKMFT 727 such as
- ATSGERBII Software for graphical display of faults, for processing Gerber data and for building fixtures
- RBS100 Reinhardt Boundary Scan
- RUDC CAD-data import
- ODBC interface for database connection
* All prices are valid in Germany and the European Community and are without taxes, transport and packing. IE & OE – Specifications subject to change without prior notice.
