• In-Circuit and Functional Test Systems
  • ATS-SMFT 780
  • ATS-MFT 770B
  • ATS-KMFT 670M-6
  • ATS-KMFT 670I-6
  • ATS-UKMFT 627
  • ATS-UKMFT 727/RML
  • ATS-UKMFT 616
• Additional Hardware
• Power Electronics Devices
• Software Modules
• Cable Tester

In-Circuit and Functional Test System ATS-MFT 770B

Load Brochure (6.7 MB)
Load Salient Features (22.07 MB)

• ATSGERB II software for processing Gerber data
  
  • Analysis of testability
    
  • Fixturing construction
  • Drilling program for bed-of-nails fixture
  • Data for graphical display of fault location
    

• Quality management
  • Statistics-software with failure statistics, repair statistics, histogram, stability
  • Traceability

• 1 combined measuring unit

for In-Circuit measurement

• pin contact (contact fault)
• short circuit, isolation (solder defect, interrupt)
• IC and transistor rotation
• components
  

for Functional test

• measuring DC and AC voltage
• peak voltage up to 100 kHz
• time- and frequency measuring unit
  periods, pulse widths, rise and fall times, events, pulse ratio and delay, phase measurement, distortion factor, Fourier analysis
• transient recorder and much else
  

• 6 Fixed voltages +5 V, -5 V, +15 V, -15 V, +40 V, -40 V

• 6 Programmable PSUs
  
  • 2 x 0 to +38 V, resolution 1 mV, max. 2 A up to 15 V, resolution 50 µA
    
  • 2 x 0 to -38 V, resolution 1 mV, 1 A, resolution 50 µA
  • 2 x 0 to +38 V, resolution 1 mV, 0.5 A, resolution 10 µA

• Programmable generators
  • sine- and square wave generator (bipolar)
    offset, output voltage/current programmable
    max. 1 MHz, resolution 100 mHz
    square wave 500 kHz 3db, sine 250 kHz 3db
    max. 25 V_eff, resolution 1 mV
    max. 1 A, resolution 100 µA
    pulse duty factor 10-90 %
    
  • pulse generator
    0.6 Hz to 10 MHz
    pulse width 0.8 s to 50 ns
    amplitude programmable from1.8 V to 5 V

• 1 Potential-free electronic load
  • current 0 to 5.1 A, resolution 100 µA, 65 W, max. 90 V
    
  • modulation 10 Hz to 10 kHz
    pulse duty factor 5-95 %
  • OVP programmable 5 V to 100 V, resolution 1 V

• 1 Stimulus matrix
  • 48 channels
  • 12 bus systems

• 1 Measuring matrix
  • 96 in-circuit and function measuring channels and guard channels
    
  • max. 1,440/4,320 measuring channels

• Monitoring

• Inline control

• Fixturing control, e.g. contacting on two stages

• Various interfaces
  • USB 5 V, 500 mA, 480 MHz
  • SPI 2.5 kHz to 10 MHz, 1.8 V to 5 V
  • 2x I2C-Bus 56 kHz to 1 MHz
  • 2x RS232-interface ±5 V, 300 Hz to 1.25 MHz
  • 422/485-interface 5 V, 300 Hz to 1.25 MHz
  • Robotbyte 16 bidirectional, 1.8 V to 5 V, about 5 kHz

• Hardware options of ATS-MFT 770 such as
  • solder defect test
  • inverse polarity of elcaps and tantal capacitors
  • diagnose and calibration unit

• Integration of various bus systems

• Power electronics

• Software modules such as
  • RBS 100 Reinhardt Boundary Scan
  • RUDC CAD-data import
  • ODBC interface for database connection