Additional hardware for our test systems
RMX 96 Measuring Matrix Board
96 channels guard channel can be freely set. High and low channels can be switched individually, 10 VA, 100 V, 500 mA Requirement: software More ...
RMX 96/64 Measuring Matrix Board
64 channels in three-wire technique for functional and in-circuit test, guard channel can be freely set. High and low channels can be switched More ...
RML 32 Combined Measuring-Logic-Stimulus Matrix
32 measuring channels in three-wire technique for in-circuit and function test, guard channel can be freely set. High and low channels can be More ...
MMX 670 Stimulus Matrix Board
48 channels in one-wire technique, for stimulating and measuring potential-free. Max. current 2 A. Each card has got 48 channels in 12 groups More ...
MMX 670 Stimulus Matrix Board with two 2/4-Quadrant PSUs
48 channels with two 2/4-Quadrant PSUs in one-wire technique, for stimulating and measuring potential-free. Max. current 2 A. Each card has got More ...
MMX 72 Stimulus Matrix Board
72 stimulus channels in one-wire technique, for stimulating and measuring potential-free. Max. current 2 A. Each card has got 72 channels in 18 More ...
EMX 48 Stimulus Matrix Board
48 normally open contacts in one-wire technique, for stimulating and measuring potential-free. 230 V, max. current 2 A Requirements: More ...
HSM 670 High-Voltage Stimulus Matrix
High-Voltage Stimulus Matrix, 16 channels in one-wire technique, for stimulating and measuring potential-free. DC max. 250 V, 10 A, 300 W, AC More ...
PMX 16 Power Matrix
16 channels 100 V, 10 A, 1,000 W switching capacity Requirements: Software Vers. 2.2.0.1x and later (not together with DOS-test systems) More ...
LOG 670 Logic Board
Logic board 30 V 32 channels, driver control. The bidirectional logic channels can be programmed to up to 30 V (20 V in ATS-UKMFT 625/627) as More ...
LOG 96 Logic Board
96 bi-directional logic channels or digital channels, driver level can be set to 5 V or 3.3 V More ...
PML 670 Precision Measuring Logic Board
16 channels, driver control; the bidirectional logic channels can be programmed to up to 30 V in 0.5 mV-steps. They can be used as driver, More ...
Current Monitor
Current monitor board for monitoring currents and voltages of the stimulus sources and for connecting an external precision multimeter More ...
MOT 470 Motorised Trimmer
(1 to 2 trimmers) and programmable resistance decade system controlled motorised trimmer for all measuring parameters incl. external IEC More ...
TRA 670 Transient Recorder
TRA 670 Transient Recorder band width 50 MHz for recording, measuring and automatic evaluation of curves and signals. Recording samples up to More ...
NGS 670 Special PSU
3 programmable PSUs 0 to +8 V, 0 to 4 A, 2 mV and 1 mA resolution, 0 to +38 V, 1 A, 0 to -38 V, 1 A, resolution 10 mV and 0.25 mA each More ...
ZDC 100
ZDC 100 Expansion module for measuring Zener diodes from 28–100 V Voltage limitation can be programmed in 50 V, 75 V and 100 V, measuring More ...
ENG-60V Potentialfree PSU
Potentialfree PSU max. 200 mA, via 2 DC-DC converters +/-15 V each, together max. 60 V, can be adjusted via voltage divider (LM317). There is a More ...
VNG 470 10fold Power Supply Unit
4 PSUs 0 to +30 V, 2 PSUs 0 to -30 V maximum current 250 mA, resolution 7.5 mV, 2 PSUs -10 to +10 V, resolution 5 mV, maximum current 250 mA, 1 More ...
AC 670 AC-Source
AC-Source 0-280 VAC, max. 42 W, can be switched for 3 ranges 0-30 VAC, 1 A, 30-140 VAC, 300 mA, 140-280 VAC, 150 mA, programmable in frequency, More ...
Function and Arbitrary Generator 20 MHz
20 MHz Function and Arbitrary Generator 1µHz to 20 MHz, sine, square wave, ramp, noise, triangle, pulse, 1 mVss to 10 Vss (50 Ohm), desktop More ...
Function and Arbitrary Generator 80 MHz
80 MHz-Function and Arbitrary Generator 1 µHz bis 80 MHz, sine, square wave 1 µHz to 100 MHz, ramp, noise, max. 1 mVss to 10 Vss (50 Ohm), More ...
LA 470 4fold Load Potential-free
4 loads with a maximum current of 4.096 A at a maximum voltage of 50 V, 12 bit resolution More ...
LMX 670-8 Power Matrix
8 locks max. 16 A, AC 425 Vpk, 300 Veff, DC 300 V and 8 high voltage measuring inputs (requires 2 board positions) More ...
VMX8 High Voltage Measuring Matrix Board
8 measuring channels for InCircuit and Function Test for max. 420 Vpk voltage incl. break amplifier for function test (max. 400 Hz) for ATS-KMFT More ...
Diagnose 670/770
SEL670/770 System Diagnose and Calibration Unit for in-circuit and function test, includes hard- and software and is used for testing the system More ...
Diagnose 627
SEL627 System Diagnose and Calibration Unit for in-circuit and function test, includes hardware incl. UKMFT627/616 docking box and software and More ...
Diagnose 616
SEL616 System Diagnose and Calibration Unit for in-circuit and function test, includes hardware incl. UKMFT627/616 docking box and software and More ...
Diagnose 625
SEL625 System Diagnose and Calibration Unit for in-circuit and function test, includes hard- and software and is used for testing the system More ...
Diagnose 645
SEL645 System Diagnose and Calibration Unit for in-circuit and function test, includes hard- and software and is used for testing the system More ...
SteuerMod-Inline USB
USB-Control module for easy integration of the test system in an inline system/production line built into a rail housing, the test system can be More ...
StartStopSteuerungUSB
Comfortable Start-/Stopbox for ATS-MFT 770, ATS-KMFT 670 and ATS-UKMFT built into a metal casing for use with a desktop version and for mounting More ...
Pass-Fail Set
Pass-Fail-Box (Set) for computer-controlled automatic opening of the various boxes, e.g. controlled by a test system, and prevents a wrong More ...
Pass-Fail Expansion
Pass-Fail Expansion 1 box, 615 x 495 x 200 mm, 1 conductive plastic tray for the PCBs, 600 x 400 x 140 mm Additional Pass-Fail-boxes help More ...
Additional Rack
Additional rack for ATS-KMFT 670/470 Compact Multi Function Test System for a max. 13 measuring matrix boards (i.e. 832 additional channels), More ...
Profile Desk Type 1
Profile Desk Type 1 HPL, 1800 mm wide, 900 mm deep, 720 mm high, with 3 sub-desk cabinets 19” wide, 12 HU high, 19” deep, can More ...
Profile Desk Type 2
Profile Desk Type 2 HPL, 1800 mm wide, 900 mm deep, 720 mm high, with 2 sub-desk cabinets 19” wide, 12 HU high, 19” deep, can More ...
Fan Expansion
Fan Expansion 3HE-PR microprocessor-controlled, soft run, can be mounted easily, also for expanding ATS-KMFT 670 and ATS-KMFT 470 (instead of More ...
High Voltage Protection
64 channel-100V Module for high-voltage protection (ICT) for installation in REINHARDT test fixtures More ...
